O Fit Kit

O Fit Kit

This easily portable metric O-Ring splicing kit, enables rapid on the spot production of O-Rings which are ideal for emergency repairs or routine maintenance.

Category:  . Brand:

To order O Fit Kit please call

0800 707 6434

Share:

Description

Kit Contents
The kit contains 14 x 2 metre packs of the most popular sizes of nitrile rubber cord, including: 1.78mm, 2mm, 2.4mm, 2.62mm, 3mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.7mm, 6mm, 7mm, 8mm.

Also included: cyanoacrylate adhesive, splicing jig, safety knife and a measuring tape.

Making an O-Ring
Establish the length and size of the required cord. Use the knife and cutting block to cut the cord. Make sure that the cut is smooth and clean of oil grease and dust. Spread a thin layer of adhesive on one of the ends and using the ridge of the cutting block – unite the two ends. Holding the ends in the ridge, press firmly together for 20 to 30 seconds. Then leave to dry for 2 to 3 minutes. Inspect the completed O-Ring which should now be ready for use.

Features and Benefits
Both adhesive and cord are able to withstand temperatures ranging between minus 20 degrees C and plus 100 degrees C.
Ideal for all workshops, on-site service engineers and service vehicles.
Reduces downtime.
Range of sizes.
Strong storage box.

Reviews

There are no reviews yet.

Add Review

Be the first to review “O Fit Kit”

About Metalyte