Up-Mark-It HB

Up-Mark-It HB is a fast curing high-build epoxy coating system for application of demarcation lines, hazard warning logo’s and hatching.

Up-Mark-It HB is a fast curing high-build epoxy coating system for application of demarcation lines, hazard warning logo’s, hatching and direction for pedestrian and truck routing to floors at a thickness from 200 to 500 microns. The coloured high gloss finish is hard wearing and has good general chemical resistance. Up-Mark-It HB can be applied to a wide variety of surfaces and finishes subject to appropriate preparation. Up-Mark-It HB is designed to be applied by brush, roller or trowel to tapes and markers with the minimum of creep, even on textured surfaces. Up-Mark-It HB is available in a limited range of colours

To order Up-Mark-It HB please call

0800 707 6434

Share:

Description

Achieving the best results with Up-Mark-It HB

New Concrete Floors: New concrete must be clean, sound, dry and fully cured and surface laitance removed preferably by enclosed shot blasting or mechanical grinding, a minimum strength of 25N/mm2 is required.
Existing Concrete Floors: Remove all dirt, oil, grease or other surface contaminants by enclosed shot blasting, scarification or mechanical grinding. Fats, oils or greases must be removed by mechanical means and detergent washing. Local repairs should be carried out using New Crete or Liquid Granite.
Coated Surfaces: Prepare the surface to ensure that there is an adequate mechanical key.
Priming: Open, porous substrates may require priming with Up-mark-It HB primer. If the substrate appears very weakand dusts easily the matrix of the screed can be strengthened by installing Up-mark-It HB Binder.
Temperatures: The ambient temperatures of the areas should not be allowed to fall below 10°C throughout the application and the curing period. Surface temperature must be above 5°C. Application is best using tape which can be removed immediately due to the high build solids within Up-mark-It HB.

tech_sheet_btn

pdf_icon_msds_new

pdf_icon_msds_new

Reviews

There are no reviews yet.

Add Review

Be the first to review “Up-Mark-It HB”

About Tero Tech